Plumbers in Burghead

Pipes freeze when the water inside them drops to 0°C and turns to ice. As water expands when it freezes, this creates intense pressure within the pipe that can cause it to crack or burst. Pipes most at risk are those in unheated spaces, lofts, garages, outbuildings, and external walls. Proper lagging (insulation) greatly reduces this risk.

Low water pressure can have several causes: a partially closed stopcock, limescale build-up in older pipes or fittings, a faulty pressure-reducing valve, a leak on the supply pipe, or a supply pressure issue from the water main itself. A plumber can diagnose the root cause and advise on the most effective remedy.

Banging or hammering sounds in pipes, sometimes called 'water hammer', are usually caused by pressure surges when a tap or valve is closed quickly. This can also be caused by loose pipework that is not properly secured, allowing it to move against joists or walls when water flows through. A plumber can fit a water hammer arrestor or secure the pipework to resolve the issue.

A constantly running toilet cistern is usually caused by a faulty flap valve (the seal at the bottom of the cistern) or a malfunctioning float valve that fails to shut off the water supply once the cistern is full. Both are relatively straightforward repairs for a plumber and, if left unaddressed, can waste a significant amount of water over time.

A sealed central heating system that repeatedly loses pressure most commonly has either a small leak somewhere in the system (including at a radiator valve, joint, or the boiler itself), a faulty expansion vessel that has lost its charge, or a failing pressure relief valve. A plumber or heating engineer can pressure-test the system and identify the cause.